BOOT DRYER OPTIFLOW
BOOTS 100%
PRODUCT LINE_ UNIQ PANEL PANEL PANEL




-
PRODUCT DESCRIPTION
-
24 MONTHS GUARANTEE
MADE IN THE EU
-
PRODUCT DESCRIPTION
-
24 MONTHS GUARANTEE
MADE IN THE EU
-
PRODUCT DESCRIPTION
-
24 MONTHS GUARANTEE
MADE IN THE EU
-
PRODUCT DESCRIPTION
-
24 MONTHS GUARANTEE
MADE IN THE EU
PRODUCT DESCRIPTION_
Boot Dryer Optiflow is the most advanced QBL dryer, which connects attractive design, high drying efficiency and outstanding ergonomics. Thanks to the smart construction the width of the device is limited to 50cm, what saves loads of presious space in ski rentals and depots. The electrical system is divided into three segments, and it is made of high-quality components designed for continuous operation. All functions of the dryer are controlled using a touchscreen. Using a few buttons you can set the operating mode of each segment, its air temperature and drying times. The arms, on which boots are placed, are replaceable and equipped with nozzles with a spring which opens air supply only when a boot is placed on the arm. The function of controlling the segments, adjusting working hours and the open-close nozzle system contribute substantially to the high effectiveness of drying and energy efficiency of the device.
Product Sheet (600 KB)SPECIFICATION_
| LENGTH MM |
CAPACITY PAIRS OF BOOTS |
POWER* W |
| 1500 | 48 | 260/5680 |
| 1800 | 60 | 250/5680 |
| 2000 | 72 | 510/7730 |
| 2400 | 84 | 510/7730 |
| 3000 | 108 | 510/7730 |
| 4000 | 144 | 2x510/7730 |
| HEIGHT MM |
WIDTH MM |
VOLTAGE V |
| 2250 | 800 | 230/3x400 |
* Consumption without heating / with heating

FLOOR PLATES
STABLE STORAGE & WATER DRAINAGE
The bottom of the depot locker, on which skis or snowboards are placed, is one of the two floor plates fitted to the locker. These are: a tub made of galvanised perforated steel and a stainless steel tub – in a closed version or with several drainage holes. When a perforated tub is used, water dripping from skis or boots gets through the grating directly under the locker. A full stainless-steel tub retains water, while drainage holes allow water to be drained into a tank placed under the locker or for a drainage pipe system to be installed. The floor plates can be additionally equipped with anti-slip rubber mats.

FLOOR PLATES
STABLE STORAGE & WATER DRAINAGE
The bottom of the depot locker, on which skis or snowboards are placed, is one of the two floor plates fitted to the locker. These are: a tub made of galvanised perforated steel and a stainless steel tub – in a closed version or with several drainage holes. When a perforated tub is used, water dripping from skis or boots gets through the grating directly under the locker. A full stainless-steel tub retains water, while drainage holes allow water to be drained into a tank placed under the locker or for a drainage pipe system to be installed. The floor plates can be additionally equipped with anti-slip rubber mats.

FLOOR PLATES
STABLE STORAGE & WATER DRAINAGE
The bottom of the depot locker, on which skis or snowboards are placed, is one of the two floor plates fitted to the locker. These are: a tub made of galvanised perforated steel and a stainless steel tub – in a closed version or with several drainage holes. When a perforated tub is used, water dripping from skis or boots gets through the grating directly under the locker. A full stainless-steel tub retains water, while drainage holes allow water to be drained into a tank placed under the locker or for a drainage pipe system to be installed. The floor plates can be additionally equipped with anti-slip rubber mats.

FLOOR PLATES
STABLE STORAGE & WATER DRAINAGE
The bottom of the depot locker, on which skis or snowboards are placed, is one of the two floor plates fitted to the locker. These are: a tub made of galvanised perforated steel and a stainless steel tub – in a closed version or with several drainage holes. When a perforated tub is used, water dripping from skis or boots gets through the grating directly under the locker. A full stainless-steel tub retains water, while drainage holes allow water to be drained into a tank placed under the locker or for a drainage pipe system to be installed. The floor plates can be additionally equipped with anti-slip rubber mats.

FLOOR PLATES
STABLE STORAGE & WATER DRAINAGE
The bottom of the depot locker, on which skis or snowboards are placed, is one of the two floor plates fitted to the locker. These are: a tub made of galvanised perforated steel and a stainless steel tub – in a closed version or with several drainage holes. When a perforated tub is used, water dripping from skis or boots gets through the grating directly under the locker. A full stainless-steel tub retains water, while drainage holes allow water to be drained into a tank placed under the locker or for a drainage pipe system to be installed. The floor plates can be additionally equipped with anti-slip rubber mats.

FLOOR PLATES
STABLE STORAGE & WATER DRAINAGE
The bottom of the depot locker, on which skis or snowboards are placed, is one of the two floor plates fitted to the locker. These are: a tub made of galvanised perforated steel and a stainless steel tub – in a closed version or with several drainage holes. When a perforated tub is used, water dripping from skis or boots gets through the grating directly under the locker. A full stainless-steel tub retains water, while drainage holes allow water to be drained into a tank placed under the locker or for a drainage pipe system to be installed. The floor plates can be additionally equipped with anti-slip rubber mats.

FLOOR PLATES
STABLE STORAGE & WATER DRAINAGE
The bottom of the depot locker, on which skis or snowboards are placed, is one of the two floor plates fitted to the locker. These are: a tub made of galvanised perforated steel and a stainless steel tub – in a closed version or with several drainage holes. When a perforated tub is used, water dripping from skis or boots gets through the grating directly under the locker. A full stainless-steel tub retains water, while drainage holes allow water to be drained into a tank placed under the locker or for a drainage pipe system to be installed. The floor plates can be additionally equipped with anti-slip rubber mats.

FLOOR PLATES
STABLE STORAGE & WATER DRAINAGE
The bottom of the depot locker, on which skis or snowboards are placed, is one of the two floor plates fitted to the locker. These are: a tub made of galvanised perforated steel and a stainless steel tub – in a closed version or with several drainage holes. When a perforated tub is used, water dripping from skis or boots gets through the grating directly under the locker. A full stainless-steel tub retains water, while drainage holes allow water to be drained into a tank placed under the locker or for a drainage pipe system to be installed. The floor plates can be additionally equipped with anti-slip rubber mats.
TECHNOLOGIES_

100% BooTS
OPENING NOZZLE SYSTEM
INCREASED EFFICIENCY & ENERGY-SAVING

100% BooTS
OPENING NOZZLE SYSTEM
INCREASED EFFICIENCY & ENERGY-SAVING

100% BooTS
OPENING NOZZLE SYSTEM
INCREASED EFFICIENCY & ENERGY-SAVING

100% BooTS
OPENING NOZZLE SYSTEM
INCREASED EFFICIENCY & ENERGY-SAVING

100% BooTS
OPENING NOZZLE SYSTEM
INCREASED EFFICIENCY & ENERGY-SAVING

100% BooTS
OPENING NOZZLE SYSTEM
INCREASED EFFICIENCY & ENERGY-SAVING

100% BooTS
OPENING NOZZLE SYSTEM
INCREASED EFFICIENCY & ENERGY-SAVING

100% BooTS
OPENING NOZZLE SYSTEM
INCREASED EFFICIENCY & ENERGY-SAVING
FRONT BOARD DECORS_

CLEAF
SHERWOOD KENSINGTON PARK
S072

CLEAF
SHERWOOD KENSINGTON PARK
S072

CLEAF
SHERWOOD KENSINGTON PARK
S072

CLEAF
SHERWOOD KENSINGTON PARK
S072

CLEAF
SHERWOOD KENSINGTON PARK
S072

CLEAF
SHERWOOD KENSINGTON PARK
S072

CLEAF
SHERWOOD KENSINGTON PARK
S072

CLEAF
SHERWOOD KENSINGTON PARK
S072

CLEAF
SHERWOOD KENSINGTON PARK
S072

CLEAF
SHERWOOD KENSINGTON PARK
S072

CLEAF
SHERWOOD KENSINGTON PARK
S072

CLEAF
SHERWOOD KENSINGTON PARK
S072

CLEAF
SHERWOOD KENSINGTON PARK
S072

CLEAF
SHERWOOD KENSINGTON PARK
S072

CLEAF
SHERWOOD KENSINGTON PARK
S072

CLEAF
SHERWOOD KENSINGTON PARK
S072



